Stacyc battery adapter for Dewalt or Milwaukee 20v batteries
Back up and running! Shipping time may be extended but orders should all go out within 5 business days of placing the order. Typically sooner but currently in transition so packing times may be a bit longer.
The original custom adapter for running Stacyc bikes using dewalt 20v batteries! No mods to the bike needed and can still use OEM Stacyc batteries as well.
Design is recently updated for the new 12/16 models and should not have any issues going forward.
The unit clips into the stock battery slot and is secured with a single screw to hold the paddle in place, while the battery adapter is attached with some double back tape and zip ties around the seat post and top tube. The paddle is easily removable so that the stock battery you have can still be used as well!
A note regarding battery drain - Stacyc bikes have a low voltage cutoff built into the bike, but designed around their own OEM batteries. If you regularly overdraw the Dewalt, or Milwaukee batteries, they may quit being recognized by the charger. SO - be careful and change batteries when low, and do not leave on bikes overnight as the phantom draw may brick the battery. Also, if the bike shuts off when the battery drains, don’t power cycle the bike and try to keep riding, that will also overdrain.
IF this happens, you can try to “jumpstart” the battery - see video here:https://www.youtube.com/watch?v=q9DsL9PziyE
Please expect 5-6 days for shipping time (shipping out). Typically arrive within 3-5 days after that via USPS. I only list stock that I have on hand that can be built up within a couple of days. Also, if you’re package arrives damaged, please take a picture and let me know as I insure all packages and we’ll get it squared away. Shipping time varies based on the day job, I usually try to get everything in the mail within a couple days of ordering, but can’t promise. Thanks for understanding!
*Disclaimer* Use of this adapter is at user’s own risk and seller does not claim responsibility for any damage to the bike, Batteries or injury caused by use of the device or the item its being used for. Accepting and use of this item equates to an agreement to these terms and buyer will not hold the seller liable for any further damages or problems. For your own piece of mind - I suggest double checking the polarity of the adapter using a voltmeter prior to use. I do this for each unit before I ship it out, but its always good to have a double check and I do not warranty or cover the cost to your bike if there happens to be any damage due to an error during assembly. I know this is frustrating, but simply based on order volume and scale, I have to make this disclaimer.
Returns: I’m not currently taking returns on these products under normal circumstances. If there is a problem with your order, please contact me and I’ll do my best to make sure everything is working! However, returns for changing your mind isn’t an option as this is a small side business for me and I can’t do that at this time. If you damage your adapter and need help with repair, please reach out as I’ll be glad to help you get it up and running again.
Back up and running! Shipping time may be extended but orders should all go out within 5 business days of placing the order. Typically sooner but currently in transition so packing times may be a bit longer.
The original custom adapter for running Stacyc bikes using dewalt 20v batteries! No mods to the bike needed and can still use OEM Stacyc batteries as well.
Design is recently updated for the new 12/16 models and should not have any issues going forward.
The unit clips into the stock battery slot and is secured with a single screw to hold the paddle in place, while the battery adapter is attached with some double back tape and zip ties around the seat post and top tube. The paddle is easily removable so that the stock battery you have can still be used as well!
A note regarding battery drain - Stacyc bikes have a low voltage cutoff built into the bike, but designed around their own OEM batteries. If you regularly overdraw the Dewalt, or Milwaukee batteries, they may quit being recognized by the charger. SO - be careful and change batteries when low, and do not leave on bikes overnight as the phantom draw may brick the battery. Also, if the bike shuts off when the battery drains, don’t power cycle the bike and try to keep riding, that will also overdrain.
IF this happens, you can try to “jumpstart” the battery - see video here:https://www.youtube.com/watch?v=q9DsL9PziyE
Please expect 5-6 days for shipping time (shipping out). Typically arrive within 3-5 days after that via USPS. I only list stock that I have on hand that can be built up within a couple of days. Also, if you’re package arrives damaged, please take a picture and let me know as I insure all packages and we’ll get it squared away. Shipping time varies based on the day job, I usually try to get everything in the mail within a couple days of ordering, but can’t promise. Thanks for understanding!
*Disclaimer* Use of this adapter is at user’s own risk and seller does not claim responsibility for any damage to the bike, Batteries or injury caused by use of the device or the item its being used for. Accepting and use of this item equates to an agreement to these terms and buyer will not hold the seller liable for any further damages or problems. For your own piece of mind - I suggest double checking the polarity of the adapter using a voltmeter prior to use. I do this for each unit before I ship it out, but its always good to have a double check and I do not warranty or cover the cost to your bike if there happens to be any damage due to an error during assembly. I know this is frustrating, but simply based on order volume and scale, I have to make this disclaimer.
Returns: I’m not currently taking returns on these products under normal circumstances. If there is a problem with your order, please contact me and I’ll do my best to make sure everything is working! However, returns for changing your mind isn’t an option as this is a small side business for me and I can’t do that at this time. If you damage your adapter and need help with repair, please reach out as I’ll be glad to help you get it up and running again.
Back up and running! Shipping time may be extended but orders should all go out within 5 business days of placing the order. Typically sooner but currently in transition so packing times may be a bit longer.
The original custom adapter for running Stacyc bikes using dewalt 20v batteries! No mods to the bike needed and can still use OEM Stacyc batteries as well.
Design is recently updated for the new 12/16 models and should not have any issues going forward.
The unit clips into the stock battery slot and is secured with a single screw to hold the paddle in place, while the battery adapter is attached with some double back tape and zip ties around the seat post and top tube. The paddle is easily removable so that the stock battery you have can still be used as well!
A note regarding battery drain - Stacyc bikes have a low voltage cutoff built into the bike, but designed around their own OEM batteries. If you regularly overdraw the Dewalt, or Milwaukee batteries, they may quit being recognized by the charger. SO - be careful and change batteries when low, and do not leave on bikes overnight as the phantom draw may brick the battery. Also, if the bike shuts off when the battery drains, don’t power cycle the bike and try to keep riding, that will also overdrain.
IF this happens, you can try to “jumpstart” the battery - see video here:https://www.youtube.com/watch?v=q9DsL9PziyE
Please expect 5-6 days for shipping time (shipping out). Typically arrive within 3-5 days after that via USPS. I only list stock that I have on hand that can be built up within a couple of days. Also, if you’re package arrives damaged, please take a picture and let me know as I insure all packages and we’ll get it squared away. Shipping time varies based on the day job, I usually try to get everything in the mail within a couple days of ordering, but can’t promise. Thanks for understanding!
*Disclaimer* Use of this adapter is at user’s own risk and seller does not claim responsibility for any damage to the bike, Batteries or injury caused by use of the device or the item its being used for. Accepting and use of this item equates to an agreement to these terms and buyer will not hold the seller liable for any further damages or problems. For your own piece of mind - I suggest double checking the polarity of the adapter using a voltmeter prior to use. I do this for each unit before I ship it out, but its always good to have a double check and I do not warranty or cover the cost to your bike if there happens to be any damage due to an error during assembly. I know this is frustrating, but simply based on order volume and scale, I have to make this disclaimer.
Returns: I’m not currently taking returns on these products under normal circumstances. If there is a problem with your order, please contact me and I’ll do my best to make sure everything is working! However, returns for changing your mind isn’t an option as this is a small side business for me and I can’t do that at this time. If you damage your adapter and need help with repair, please reach out as I’ll be glad to help you get it up and running again.
